Regenerative Neurology and Regenerative Cardiology: Shared Hurdles and Achievements.

From the first success in cultivation of cells in vitro, it became clear that developing cell and/or tissue specific cultures would open a myriad of new opportunities for medical research. Expertise in various in vitro models has been developing over decades, so nowadays we benefit from highly specific in vitro systems imitating every organ of the human body. Moreover, obtaining sufficient number of standardized cells allows for cell transplantation approach with the goal of improving the regeneration of injured/disease affected tissue. However, different cell types bring different needs and place various types of hurdles on the path of regenerative neurology and regenerative cardiology. In this review, written by European experts gathered in Cost European action dedicated to neurology and cardiology-Bioneca, we present the experience acquired by working on two rather different organs: the brain and the heart. When taken into account that diseases of these two organs, mostly ischemic in their nature (stroke and heart infarction), bring by far the largest burden of the medical systems around Europe, it is not surprising that in vitro models of nervous and heart muscle tissue were in the focus of biomedical research in the last decades. In this review we describe and discuss hurdles which still impair further progress of regenerative neurology and cardiology and we detect those ones which are common to both fields and some, which are field-specific. With the goal to elucidate strategies which might be shared between regenerative neurology and cardiology we discuss methodological solutions which can help each of the fields to accelerate their development.

Human Mesenchymal Stem Cells Seeded on the Natural Membrane to Neurospheres for Cholinergic-like Neurons.

This study aimed to differentiate human mesenchymal stem cells (hMSCs) from the human umbilical cord in cholinergic-like neurons using a natural membrane. The isolation of hMSCs from Wharton's jelly (WJ) was carried out using "explant" and mononuclear cells by the density gradient from umbilical blood and characterized by flow cytometry. hMSCs were seeded in a natural functional biopolymer membrane to produce neurospheres. RT-PCR was performed on hMSCs and neurospheres derived from the umbilical cord. Neural precursor cells were subjected to a standard cholinergic-like neuron differentiation protocol. Dissociated neurospheres, neural precursor cells, and cholinergic-like neurons were characterized by immunocytochemistry. hMSCs were CD73+, CD90+, CD105+, CD34- and CD45- and demonstrated the trilineage differentiation. Neurospheres and their isolated cells were nestin-positive and expressed NESTIN, MAP2, ßIII-TUBULIN, GFAP genes. Neural precursor cells that were differentiated in cholinergic-like neurons expressed ßIII-TUBULIN protein and choline acetyltransferase enzyme. hMSCs seeded on the natural membrane can differentiate into neurospheres, obtaining neural precursor cells without growth factors or gene transfection before cholinergic phenotype differentiation.

Elastomeric Cardiowrap Scaffolds Functionalized with Mesenchymal Stem Cells-Derived Exosomes Induce a Positive Modulation in the Inflammatory and Wound Healing Response of Mesenchymal Stem Cell and Macrophage.

A challenge in contractile restoration of myocardial scars is one of the principal aims in cardiovascular surgery. Recently, a new potent biological tool used within healing processes is represented by exosomes derived from mesenchymal stem cells (MSCs). These cells are the well-known extracellular nanovesicles released from cells to facilitate cell function and communication. In this work, a combination of elastomeric membranes and exosomes was obtained and tested as a bioimplant. Mesenchymal stem cells (MSCs) and macrophages were seeded into the scaffold (polycaprolactone) and filled with exosomes derived from MSCs. Cells were tested for proliferation with an MTT test, and for wound healing properties and macrophage polarization by gene expression. Moreover, morphological analyses of their ability to colonize the scaffolds surfaces have been further evaluated. Results confirm that exosomes were easily entrapped onto the surface of the elastomeric scaffolds, increasing the wound healing properties and collagen type I and vitronectin of the MSC, and improving the M2 phenotype of the macrophages, mainly thanks to the increase in miRNA124 and decrease in miRNA 125. We can conclude that the enrichment of elastomeric scaffolds functionalized with exosomes is as an effective strategy to improve myocardial regeneration.

Electrospun PCL-Based Vascular Grafts: In Vitro Tests.

BACKGROUND: Electrospun fibers have attracted a lot of attention from researchers due to their several characteristics, such as a very thin diameter, three-dimensional topography, large surface area, flexible surface, good mechanical characteristics, suitable for widespread applications. Indeed, electro-spinning offers many benefits, such as great surface-to-volume ratio, adjustable porosity, and the ability of imitating the tissue extra-cellular matrix. METHODS: we processed Poly ε-caprolactone (PCL) via electrospinning for the production of bilayered tubular scaffolds for vascular tissue engineering application. Endothelial cells and fibroblasts were seeded into the two side of the scaffolds: endothelial cells onto the inner side composed of PCL/Gelatin fibers able to mimic the inner surface of the vessels, and fibroblasts onto the outer side only exposing PCL fibers. Extracellular matrix production and organization has been performed by means of classical immunofluorescence against collagen type I fibers, Scanning Electron-Microscopy (SEM) has been performed in order to evaluated ultrastructural morphology, gene expression by means gene expression has been performed to evaluate the phenotype of endothelial cells and fibroblasts. RESULTS AND CONCLUSION: results confirmed that both cells population are able to conserve their phenotype colonizing the surface supporting the hypothesis that PCL scaffolds based on electrospun fibers should be a good candidate for vascular surgery.

Extracellular Vesicles as Innovative Tool for Diagnosis, Regeneration and Protection against Neurological Damage.

Extracellular vesicles (EVs) have recently attracted a great deal of interest as they may represent a new biosignaling paradigm. According to the mode of biogenesis, size and composition, two broad categories of EVs have been described, exosomes and microvesicles. EVs have been shown to carry cargoes of signaling proteins, RNA species, DNA and lipids. Once released, their content is selectively taken up by near or distant target cells, influencing their behavior. Exosomes are involved in cell-cell communication in a wide range of embryonic developmental processes and in fetal-maternal communication. In the present review, an outline of the role of EVs in neural development, regeneration and diseases is presented. EVs can act as regulators of normal homeostasis, but they can also promote either neuroinflammation/degeneration or tissue repair in pathological conditions, depending on their content. Since EV molecular cargo constitutes a representation of the origin cell status, EVs can be exploited in the diagnosis of several diseases. Due to their capability to cross the blood-brain barrier (BBB), EVs not only have been suggested for the diagnosis of central nervous system disorders by means of minimally invasive procedures, i.e., "liquid biopsies", but they are also considered attractive tools for targeted drug delivery across the BBB. From the therapeutic perspective, mesenchymal stem cells (MSCs) represent one of the most promising sources of EVs. In particular, the neuroprotective properties of MSCs derived from the dental pulp are here discussed.

Could Mesenchymal Stem Cell-Derived Exosomes Be a Therapeutic Option for Critically Ill COVID-19 Patients?

Coronavirus disease 2019 (COVID-19) is a pandemic viral disease originated in Wuhan, China, in December 2019, caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The severe form of the disease is often associated with acute respiratory distress syndrome (ARDS), and most critically ill patients require mechanical ventilation and support in intensive care units. A significant portion of COVID-19 patients also develop complications of the cardiovascular system, primarily acute myocardial injury, arrhythmia, or heart failure. To date, no specific antiviral therapy is available for patients with SARS-CoV-2 infection. Exosomes derived from mesenchymal stem cells (MSCs) are being explored for the management of a number of diseases that currently have limited or no therapeutic options, thanks to their anti-inflammatory, immunomodulatory, and pro-angiogenic properties. Here, we briefly introduce the pathogenesis of SARS-CoV-2 and its implications in the heart and lungs. Next, we describe some of the most significant clinical evidence of the successful use of MSC-derived exosomes in animal models of lung and heart injuries, which might strengthen our hypothesis in terms of their utility for also treating critically ill COVID-19 patients.

Finite Element Analysis Investigate Pulmonary Autograft Root and Leaflet Stresses to Understand Late Durability of Ross Operation.

Ross operation might be a valid option for congenital and acquired left ventricular outflow tract disease in selected cases. As the pulmonary autograft is a living substitute for the aortic root that bioinspired the Ross operation, we have created an experimental animal model in which the vital capacity of the pulmonary autograft (PA) has been studied during physiological growth. The present study aims to determine any increased stresses in PA root and leaflet compared to the similar components of the native aorta. An animal model and a mathematical analysis using finite element analysis have been used for the purpose of this manuscript. The results of this study advance our understanding of the relative benefits of pulmonary autograft for the management of severe aortic valve disease. However, it launches a warning about the importance of the choice of the length of the conduits as mechanical deformation, and, therefore, potential failure, increases with the length of the segment subjected to stress. Understanding PA root and leaflet stresses is the first step toward understanding PA durability and the regions prone to dilatation, ultimately to refine the best implant technique.

Recent Applications of Three Dimensional Printing in Cardiovascular Medicine.

Three dimensional (3D) printing, which consists in the conversion of digital images into a 3D physical model, is a promising and versatile field that, over the last decade, has experienced a rapid development in medicine. Cardiovascular medicine, in particular, is one of the fastest growing area for medical 3D printing. In this review, we firstly describe the major steps and the most common technologies used in the 3D printing process, then we present current applications of 3D printing with relevance to the cardiovascular field. The technology is more frequently used for the creation of anatomical 3D models useful for teaching, training, and procedural planning of complex surgical cases, as well as for facilitating communication with patients and their families. However, the most attractive and novel application of 3D printing in the last years is bioprinting, which holds the great potential to solve the ever-increasing crisis of organ shortage. In this review, we then present some of the 3D bioprinting strategies used for fabricating fully functional cardiovascular tissues, including myocardium, heart tissue patches, and heart valves. The implications of 3D bioprinting in drug discovery, development, and delivery systems are also briefly discussed, in terms of in vitro cardiovascular drug toxicity. Finally, we describe some applications of 3D printing in the development and testing of cardiovascular medical devices, and the current regulatory frameworks that apply to manufacturing and commercialization of 3D printed products.

Elastomeric cardiopatch scaffold for myocardial repair and ventricular support.

OBJECTIVES: Prevention of postischaemic ventricular dilatation progressing towards pathological remodelling is necessary to decrease ventricular wall deterioration. Myocardial tissue engineering may play a therapeutic role due to its capacity to replace the extracellular matrix, thereby creating niches for cell homing. In this experimental animal study, a biomimetic cardiopatch was created with elastomeric scaffolds and nanotechnologies. METHODS: In an experimental animal study in 18 sheep, a cardiopatch was created with adipose tissue-derived progenitor cells seeded into an engineered bioimplant consisting of 3-dimensional bioabsorbable polycaprolactone scaffolds filled with a peptide hydrogel (PuraMatrix™). This patch was then transplanted to cover infarcted myocardium. Non-absorbable poly(ethyl) acrylate polymer scaffolds were used as controls. RESULTS: Fifteen sheep were followed with ultrasound scans at 6 months, including echocardiography scans, tissue Doppler and spectral flow analysis and speckle-tracking imaging, which showed a reduction in longitudinal left ventricular deformation in the cardiopatch-treated group. Magnetic resonance imaging (late gadolinium enhancement) showed reduction of infarct size relative to left ventricular mass in the cardiopatch group versus the controls. Histopathological analysis at 6 months showed that the cardiopatch was fully anchored and integrated to the infarct area with minimal fibrosis interface, thereby promoting angiogenesis and migration of adipose tissue-derived progenitor cells to surrounding tissues. CONCLUSIONS: This study shows the feasibility and effectiveness of a cardiopatch grafted onto myocardial infarction scars in an experimental animal model. This treatment decreased fibrosis, limited infarct scar expansion and reduced postischaemic ventricular deformity. A capillary network developed between our scaffold and the heart. The elastomeric cardiopatch seems to have a positive impact on ventricular remodelling and performance in patients with heart failure.

Exosome in Cardiovascular Diseases: A Complex World Full of Hope.

Exosomes are a subgroup of extracellular vesicles containing a huge number of bioactive molecules. They represent an important means of cell communication, mostly between different cell populations, with the purpose of maintaining tissue homeostasis and coordinating the adaptive response to stress. This type of intercellular communication is important in the cardiovascular field, mainly due to the fact that the heart is a complex multicellular system. Given the growing interest in the role of exosomes in cardiovascular diseases and the numerous studies published in the last few decades, we focused on the most relevant results about exosomes in the cardiovascular filed starting from their characterization, passing through the study of their function, and ending with perspectives for their use in cardiovascular therapies.

Circulatory Flow Restoration Versus Cardiopulmonary Resuscitation: New Therapeutic Approach in Sudden Cardiac Arrest.

Sudden cardiac arrest (SCA) remains a major problem for health authorities worldwide. Insufficiencies of current cardiopulmonary resuscitation (CPR) are most probably related to an inappropriate concept and applied methods that still concentrate on heartbeat as priority, instead of blood circulation to maintain organs' perfusions. The aim of this works is to propose a new therapeutic approach for SCA in a more effective and secure manner compared with current CPR methods. It correlates to a non-invasive circulatory flow restoration (CFR) device composed of a multilayered thoracic and infradiaphragmatic compartments that will be pulsated alternatively and in fixed frequencies using a low-pressure pneumatic generator. Proof-of-concept studies with different prototypes and methods of SCA, showed restoration of hemodynamics (BP ≥ 100 mm Hg) and increased urine output after 20 min of cardiac arrest in pediatric dogs and piglets. In summary, a CFR device can induce shear stress-mediated endothelial function to restore microcirculation and cellular metabolism. This represents a cost-effective method, predisposes to return of spontaneous circulation in case of SCA, adaptable for all age groups, in public and hospital environments.

Compliance mismatch and compressive wall stresses drive anomalous remodelling of pulmonary trunks reinforced with Dacron grafts.

Synthetic grafts are often satisfactory employed in cardiac and vascular surgery, including expanded poly(ethylene terephthalate) or expanded poly(tetrafluoroethylene). However, accumulating evidences suggest the emergence of worrisome issues concerning the long-term fate of prosthetic grafts as large vessel replacement. Disadvantages related to the use of synthetic grafts can be traced in their inability of mimicking the elasto-mechanical characteristics of the native vascular tissue, local suture overstress leading to several prosthesis-related complications and retrograde deleterious effects on valve competence, cardiac function and perfusion. Motivated by this, in the present work it is analyzed - by means of both elemental biomechanical paradigms and more accurate in silico Finite Element simulations - the physical interaction among aorta, autograft and widely adopted synthetic (Dacron) prostheses utilized in transposition of pulmonary artery, highlighting the crucial role played by somehow unexpected stress fields kindled in the vessel walls and around suture regions, which could be traced as prodromal to the triggering of anomalous remodelling processes and alterations of needed surgical outcomes. Theoretical results are finally compared with histological and surgical data related to a significant experimental animal campaign conducted by performing pulmonary artery transpositions in 30 two-month old growing lambs, followed up during growth for six months. The in vivo observations demonstrate the effectiveness of the proposed biomechanical hypothesis and open the way for possible engineering-guided strategies to support and optimize surgical procedures.

Biomechanics drive histological wall remodeling of neoaortic root: A mathematical model to study the expression levels of ki 67, metalloprotease, and apoptosis transition.

The pulmonary artery autograft (PA) is the ideal substitute for aortic valve disease in children and young adult. However, it is harnessed by the issue of long-term dilation and regurgitation, often requiring surgery. PA implanted in aortic position during the growth phase in children undergoes a process of mechanical remodeling. We previously developed a semiresorbable armored prosthesis able to mechanically sustain the neoaorta preventing dilation and to gradually integrate with the PA wall inducing a progressive arterial-like tissue positive remodeling. We also described the mechanisms of growth, remodeling and stress shielding of the reinforced PA through a mathematical model. We sought to demonstrate the biological counterpart and the potential molecular mechanisms underlying this histological and mechanical remodeling. A specific mathematical model was developed to describe mechanical behavior of the PA. Mallory trichrome red staining and immunohistochemistry for MMP-9 were performed to elucidate extracellular matrix remodeling phenomena. Apoptosis and cell proliferation were determined by TUNEL assay and immunohistochemistry for Ki67, respectively. An histological remodeling phenomenon sustained by increased level of MMP-9, augmented cell proliferation and reduced apoptosis in the reinforced PA was demonstrated. The mathematical model predicted the biomechanical behavior subtended by the histological changes of the PA in these settings. Changes in metalloproteinases (MMP-9), cell proliferation and apoptosis are the main actors in the remodeling process occurring after transposition of the PA into systemic regimens. Use of semiresorbable reinforcements might induce a positive remodeling of the PA in the context of Ross operation. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2785-2793, 2016.

A composite semiresorbable armoured scaffold stabilizes pulmonary autograft after the Ross operation: Mr Ross's dream fulfilled.

OBJECTIVES: Use of resorbable external reinforcement of the pulmonary autograft during the Ross operation has been suggested, but the differential regional potential for dilation of the aorta, mainly regarding the neo-root and the neo-Valsalva sinuses, represents an unresolved issue. Auxetic materials could be useful in preventing dilation given their favorable mechanical properties. We designed a composite semiresorbable armoured bioprosthesis constituted by polydioxanone and expanded polytetrafluoroethylene and evaluated its effectiveness as a pulmonary autograft reinforcement device in an animal model of the Ross procedure. METHODS: An experimental model of the Ross procedure was performed in 20 three-month-old growing lambs. The pulmonary autograft was alternatively nonreinforced (control group n = 10) or reinforced with composite bioprosthesis (reinforced group n = 10). Animals were followed up during growth for 6 months by angiography and echocardiography. Specific stainings for extracellular matrix and immunohistochemistry for metalloproteinase-9 were performed. RESULTS: Reference aortic diameter increased from 14 ± 1 mm to 19 ± 2 mm over 6 months of growth. In the control group, pulmonary autograft distension (28 ± 2 mm) was immediately noted, followed by aneurysm development at 6 months (40 ± 2 mm, P < .001 vs reference). In the reinforced group, an initial dilation to 18 ± 1 mm was detected and the final diameter was 27 ± 2 mm (42% increase). Two deaths due to pulmonary autograft rupture occurred in the control group. On histology, the control group showed medial disruption with connective fibrous replacement, whereas in the reinforced group compensatory intimal hyperplasia was present in the absence of intimal tears. The bioprosthesis promoted a positive matrix rearrangement process favoring neoarterialization and elastic remodeling as demonstrated on specific staining for elastin collagen and metalloproteinase-9. CONCLUSIONS: The device adapted and functionally compensated for the characteristics of autograft growth, guaranteeing a reasonable size of the autograft at 6 months, but more important, because the device is biocompatible, it did not disrupt the biological process of growth or cause inflammatory damage to the wall.

An International Survey on Taking Up a Career in Cardiovascular Research: Opportunities and Biases toward Would-Be Physician-Scientists.

BACKGROUND: Cardiovascular research is the main shaper of clinical evidence underpinning decision making, with its cyclic progression of junior researchers to mature faculty members. Despite efforts at improving cardiovascular research training, several unmet needs persist. We aimed to appraise current perceptions on cardiovascular research training with an international survey. METHODS AND RESULTS: We administered a 20-closed-question survey to mentors and mentees belonging to different international institutions. A total of 247 (12%) surveys were available (out of 2,000 invitations). Overall, mentees and mentors were reasonably satisfied with the educational and research resources. Significant differences were found analyzing results according to gender, geographic area, training and full-time researcher status. Specifically, women proved significantly less satisfied than men, disclosed access to fewer resources and less support from mentors (all P<0.05). People working in institutions not located in North America or Northern/Central Europe were significantly less satisfied and disclosed much less support (both P<0.05). Those in training reported limited opportunities for collaboration (P = 0.009), and non-full-time researchers disclosed more limited access to tutors and formal grant writing training (both P<0.05). CONCLUSIONS: Several potential biases appear to be present in the way training in cardiovascular research is provided worldwide, including one against women. If confirmed, these data require proactive measures to decrease discriminations and improve the cardiovascular research training quality.

An experimental model of the Ross operation: Development of resorbable reinforcements for pulmonary autografts.

OBJECTIVES: To circumvent the issue of pulmonary autograft (PA) dilation after the Ross procedure, surgical reinforcement strategies have been suggested in clinical or anecdotal series. However, no preclinical large-animal model of the Ross procedure is available, which is needed to enable full comprehension of the pathologic mechanisms and the effectiveness of reinforcement techniques during growth. Our aim was to develop a large-animal model of the Ross operation, to reproduce the clinical scenario in which this procedure might be applied, and allow for development and testing of various devices and techniques to improve PA performance. In addition, we aimed to test the effectiveness of a bioresorbable mesh for PA reinforcement. METHODS: An experimental model of transposition of the pulmonary trunk as an autograft in the aortic position has been developed and performed under cardiopulmonary bypass in 20 growing lambs, aged 3 months. The experimental design included: a control group that underwent PA transposition; a group in which the PA was reinforced with an external, synthetic, nonresorbable, polypropylene grid; and a group that received various combinations of resorbable meshes. Animals were followed up during growth for 6 months by angiography and echocardiography and eventually killed for pathologic analysis. RESULTS: All animals survived the procedure with no complications. The model was easy and reproducible. Resorbable meshes prevented PA dilation and preserved its progressive growth process, aiding histologic remodelling. CONCLUSIONS: We developed an easy and reproducible model of the Ross procedure, allowing for a reliable simulation of the clinical scenario. Resorbable PA reinforcement may represent an interesting option in this context.

Engineered 3D bioimplants using elastomeric scaffold, self-assembling peptide hydrogel, and adipose tissue-derived progenitor cells for cardiac regeneration.

Contractile restoration of myocardial scars remains a challenge with important clinical implications. Here, a combination of porous elastomeric membrane, peptide hydrogel, and subcutaneous adipose tissue-derived progenitor cells (subATDPCs) was designed and evaluated as a bioimplant for cardiac regeneration in a mouse model of myocardial infarction. SubATDPCs were doubly transduced with lentiviral vectors to express bioluminescent-fluorescent reporters driven by constitutively active, cardiac tissue-specific promoters. Cells were seeded into an engineered bioimplant consisting of a scaffold (polycaprolactone methacryloyloxyethyl ester) filled with a peptide hydrogel (PuraMatrix™), and transplanted to cover injured myocardium. Bioluminescence and fluorescence quantifications showed de novo and progressive increases in promoter expression in bioactive implant-treated animals. The bioactive implant was well adapted to the heart, and fully functional vessels traversed the myocardium-bioactive implant interface. Treatment translated into a detectable positive effect on cardiac function, as revealed by echocardiography. Thus, this novel implant is a promising construct for supporting myocardial regeneration.

Design and assembly procedures for large-sized biohybrid scaffolds as patches for myocardial infarct.

OBJECTIVE: To assemble a biohybrid cardiac patch consisting of a large (5 × 5 cm) elastomer scaffold whose pores are filled with a self-assembling peptide (SAP) gel entrapping adipose stem cells, to be used as a novel implant in a big animal model (sheep) of myocardial infarction. The study focuses on the way to determine optimal procedures for incorporating the SAP solution and the cells in the patch to ensure cell colonization and a homogeneous cell distribution in the construct before implantation. The problems associated with the scale-up of the different procedures raised by the large size of the construct are discussed. MATERIALS AND METHODS: Experiments were performed to choose between different assembling alternatives: incorporation of the SAP gel before cell seeding or simultaneous SAP and cell loading of the scaffold; surface seeding of cells or cell injection into the scaffold pores; dissemination of the cells throughout the scaffold before incubation by gentle shaking or by centrifugation. Immunocytochemistry techniques and confocal and scanning electron microscopies were employed to assess and quantify cell colonization of the material and early cell distribution. Cell concentrations and the uniformity of cellular distribution throughout the scaffold were taken as the main criteria to decide between the different alternative procedures. RESULTS: The combination of peptide preloading, cell injection, and shaking before incubation yielded the best results in terms of greater cell density and the most uniform distribution after 24 h of culture compared with the other methods. These techniques could be scaled-up to obtain large biohybrid cardiac patches with success. CONCLUSIONS: The results obtained after the different seeding methods allowed us to establish an effective protocol for the assembly of large biohybrid patches for their subsequent implantation in the heart of a big animal model of myocardial infarct in the context of a preclinical study.